Lightwave T20 Hyper XT

£699.00

4 SEASON | 2 PERSON | EXTENDED PORCH | WEIGHS 2.52 Kg

Lightwave T20 XT Hyper tent is a 2 person 4 season tent that has been developed specifically for use where low packed weight and robust all-weather performance are paramount. The Hyper T20 XT is light enough to carry on extended wilderness treks and strong enough to withstand the worst conditions.

The Hyper range offers three major performance innovations: 1. Hyper tents are completely multi-pitch. In other words, they can be erected flysheet-first, inner-tent first, or flysheet and inner tent together. 2. Even though the flysheet fabric is silicone-coated on both sides, the flysheet seams are factory-taped making them fully weather-proof. 3. Hyper poles are fully maintainable in the field. Should any sections fail, they are easily removed and replaced with the spares provided with each pole set.

The fabrics used in the Hyper tents strike a calculated balance between strength and weight (any thinner yarn or lower fabric weight, and fabric strength would be seriously compromised). For guy-lines, hyper tents use a Dyneema/polyester cord that is 80% lighter than standard nylon. Each tent comes with a range of different pegs to cover all ground conditions, from hard-packed ground to loose sandy soil.

  • Specifications

    Flysheet 51 g/m2, 30d nylon 6.6 ripstop, silicone-coated on both sides 5000 mm hydrostatic head

    The Hyper flysheet is made from nylon 6.6 with a yarn thickness of 30 denier. There has been a trend in recent times towards the use of 20 denier or even 15 denier yarns in many lightweight and ultra-lightweight tents. Lightwave believes such fabrics lack the intrinsic strength that a flysheet needs if it is to withstand high winds and provide long-term durability. 30-denier yarn offers this strength while still remaining extremely light. The strength of the hyper flysheet is further assured by using only high-tenacity nylon 6.6, which has a higher tensile strength than normal nylon. Finally, the fabric is silicone-coated on both sides for water resistance to a hydrostatic head of 5000 mm. As well as being the most durable and water-repellent coating of them all, silicone has another major advantage over conventional polyurethane (PU): it doesn’t affect the fabric strength. PU coatings reduce the tear strength by up to 70%, in our view making them less suitable as a flysheet coating – especially on very lightweight fabrics which have a relatively low tear strength to start with.

    Groundsheet 70 g/m2, 40d nylon ripstop, TPU laminated 7000 mm hydrostatic head, factory-taped seams The hyper groundsheet is made from a 40-denier nylon ripstop with a laminated thermo-plastic polyurethane (TPU) coating. TPU coatings have greater bonding durability (to the substrate fabric) and better abrasion resistance than conventional liquid-applied PU coatings. This is a much tougher fabric than it looks.

    Inner canopy 30g/m2, 20d nylon 6.6 ripstop, DWR treated

    Poles DAC 9.35 mm Featherlite poles

    Hyper tents use 9.35 mm DAC Featherlight poles. These are light, strong and reliable. (The earlier version of the hyper tents with the taped flysheets used Yunan 9.60 mm 7001-T6 Ultralight poles with Unit connectors).

    Pegs Lightning pegs, 11 g each, square section ( 6 pegs) Wavelight pegs, 12 g each, corkscrew design ( 4 pegs) Titanium V-pegs, 10 g each, V-shape (4 pegs) Flash pegs, 7 g each, narrow section (4 pegs)

    Pegs are a vital component of every tent. Tunnel tents are of course completely dependent upon solid anchors at front and rear, but a self-supporting geodesic, too, needs to be prevented from blowing away in the breeze. Lightwave offers a range of different pegs with the hyper tents to ensure they can be secured in all ground conditions.

    Guylines 1.50 mm dyneema/polyester, 3 m length, mini-Linelok adjusters

    Hyper tents come with our Lightning guy-lines, a 1.50 mm blend of Dyneema and polyester with a breaking strain of 110 kg. Phenomenally light, they also absorb no water so won’t freeze up in winter. The Line-lok adjusters mean they are easy to tension, even with gloves on.